Design, build and repair across Mumbai · Free site visit & 3D concept +91 96190 04320 · +91 90221 49569
Home/Wardrobe Design/Loft Storage
Wardrobe Design

Loft & Overhead Storage Design

A loft shutter you need two hands and a stool to hold open is a loft you will stop using.

Free site visit

Measured survey and an itemised quote, at no cost.

No cost, no obligation. We call back within 2 working hours, or reach us on WhatsApp.

Overview

About loft storage

Mumbai flats live on their lofts. Suitcases, bedding, festival items, things that come out twice a year — all of it goes up, and in a flat without a store room there is nowhere else for it.

The usual failure is mechanical rather than structural. A plywood shutter 600 mm or more tall is heavy, and without a gas lift it needs holding open with one hand while you reach with the other, from a stool. Most people stop opening it.

Specification

What we specify

Gas liftFitted on any shutter over 600 mm height so it holds itself open
Shelf loading18 mm BWP 710 with a centre support beyond 900 mm span
HeightUnderside at 2,100 mm, integrated with the wardrobe run rather than a separate box
Masonry loftsWhere an existing RCC or masonry loft exists, we build up to it rather than replacing it
AccessShutter divided so each leaf is reachable from a single stool position
Our process

How we run the work

Free site measurement

We measure the opening at three heights, check wall plumb and note beam or duct intrusions.

Storage audit

A short conversation about what goes in — saris, suits, luggage, bedding — before any layout is drawn.

3D design and layout

You see the elevation and the internal layout, with hanging, shelf and drawer split marked.

Itemised quotation

Carcass grade, shutter finish, hardware brand and internal accessories each priced separately.

Answers

Loft Storage — questions

Should I replace my existing masonry loft?

Usually not. An existing RCC or brick loft carries far more weight than a plywood one and is already there. We build the wardrobe up to it and face it so it reads as part of the unit. Demolishing a sound masonry loft to replace it with plywood is a cost with a downside attached.

Why does the shutter need a gas lift?

Because a 600 mm plywood shutter is heavy, and holding it open with one hand while reaching into the loft from a stool is both awkward and unsafe. The gas lift costs little and it is the difference between a loft that gets used and one that does not.

How much weight can a plywood loft shelf take?

18 mm BWP 710 with supports at 900 mm centres handles normal suitcase and bedding loads comfortably. Beyond 900 mm of unsupported span it will bow under sustained weight. We add a centre support rather than increasing thickness, which is cheaper and more effective.

Free site visit for Loft Storage

We survey, measure and give you a written scope and itemised quotation at no cost.

Call WhatsApp Free visit