Design, build and repair across Mumbai · Free site visit & 3D concept +91 96190 04320 · +91 90221 49569
Home/Wardrobe Design/Bedroom Wardrobe
Wardrobe Design

Wardrobe Design for Bedroom

The right hanging-to-shelf ratio is not a style question. It depends on whether the household wears saris or suits.

Free site visit

Measured survey and an itemised quote, at no cost.

No cost, no obligation. We call back within 2 working hours, or reach us on WhatsApp.

Overview

About bedroom wardrobe

Standard wardrobe layouts come from a default that suits nobody in particular — a long hanging section, a few shelves, one drawer. It is what gets drawn when nobody asks what is going inside.

A sari needs a 1,050 mm hanging drop and benefits from a pull-out rather than a shelf. Suits need 1,150 mm. Folded daily wear is better in drawers than on shelves, because a shelf stack collapses the moment you take something from the middle. These are small decisions and they decide whether the wardrobe gets used properly.

Specification

What we specify

Hanging1,050 mm drop for saris and shirts, 1,150 mm for suits and long coats
DrawersSoft-close, at 600 to 900 mm height where they are comfortable to reach
ShelvesMaximum 900 mm span before a centre support, to avoid sagging under folded weight
LoftAbove 2,100 mm, with gas-lift shutters so they hold open
Carcass18 mm BWP 710 plywood; BWP specifically where the wardrobe backs an external wall
Our process

How we run the work

Free site measurement

We measure the opening at three heights, check wall plumb and note beam or duct intrusions.

Storage audit

A short conversation about what goes in — saris, suits, luggage, bedding — before any layout is drawn.

3D design and layout

You see the elevation and the internal layout, with hanging, shelf and drawer split marked.

Itemised quotation

Carcass grade, shutter finish, hardware brand and internal accessories each priced separately.

Answers

Bedroom Wardrobe — questions

How much hanging space do I actually need?

Most households over-specify hanging and under-specify drawers. Daily-wear folded clothing lives better in drawers, because taking an item from the middle of a shelf stack collapses it. We ask what you store before drawing the layout — it is a ten-minute conversation that changes the whole internal split.

What is the right height for drawers?

Between 600 and 900 mm, where you can see into them without bending. Drawers at floor level get used for things you rarely need, which is a waste of the most accessible hardware in the wardrobe.

Should the wardrobe back onto an external wall?

If it has to, specify BWP 710 rather than BWR and leave a 25 mm air gap behind the carcass. Mumbai external walls carry moisture through the monsoon, and a carcass pressed flat against one with an unsealed back edge is where swelling starts.

Free site visit for Bedroom Wardrobe

We survey, measure and give you a written scope and itemised quotation at no cost.

Call WhatsApp Free visit