Design, build and repair across Mumbai · Free site visit & 3D concept +91 96190 04320 · +91 90221 49569
Home/TV Unit Design/Wall Mounted TV Unit
TV Unit Design

Wall Mounted TV Unit Design

Before anything else, we find out what your wall is made of. Half of Mumbai's living room walls will not hold what gets mounted on them.

Free site visit

Measured survey and an itemised quote, at no cost.

No cost, no obligation. We call back within 2 working hours, or reach us on WhatsApp.

Overview

About wall mounted tv unit

Wall mounting is the right choice in a small living room — it clears the floor entirely and the room reads larger for it.

It also puts the entire load into one plane of wall. In flats built from the 1990s onwards, internal walls are frequently 4-inch brick, block or even gypsum partition. A television bracket plus a loaded console on that, cycling with every door slam, works until it does not.

Specification

What we specify

Wall checkSounded and drill-tested at the site visit to identify RCC, brick, block or partition
RCC fixingChemical anchors, M10, into structural concrete
Partition wallsBacking plate spanning to studs or structure, or load transferred to the floor
Cable routeVertical conduit from the TV position down to the console, before panelling
BracketRated at minimum twice the television weight, tilt or fixed as specified
Our process

How we run the work

Free site visit

Wall measured and sounded to identify RCC, brick or partition. Existing points mapped.

Equipment and cable plan

We list every device that will live there and plan conduit routes before anything is drawn.

3D concept

You see the elevation in context with the sofa line and the viewing height marked.

Itemised quotation

Carcass, finish, lighting, hardware and electrical work each priced separately.

Answers

Wall Mounted TV Unit — questions

How do I know if my wall can take it?

Tap it. A solid RCC or 9-inch brick wall gives a dull, dense sound; a partition sounds hollow. That is a rough test — we drill-test at the site visit, which is conclusive. It is worth doing before you buy a bracket, because the bracket type depends entirely on the answer.

Can a TV be mounted on a gypsum partition?

Not directly into the board. It needs a backing plate spanning to the studs or to the structure behind. This is routine to do and it has to be planned, because once the board is finished, adding backing means opening it up.

Should the cables run inside the wall?

Inside a conduit, yes — chased in before the panel or the paint. Running them inside the wall without conduit means any future cable change requires breaking the wall again. The conduit costs almost nothing at first fix.

Free site visit for Wall Mounted TV Unit

We survey, measure and give you a written scope and itemised quotation at no cost.

Call WhatsApp Free visit